| 1.0 |
Fibre Channel Implementation
Configuring Fibre Channel Infrastructure |
| 1.10 |
Selecting Interfaces to Dedicate to Different Purposes |
| 1.1.1 |
Hardware Constraint on Different Line Cards |
| 1.1.2 |
Port Groups Within Modules |
| 1.20 |
ISL: Configuration of Compatible Parameters |
| 1.2.1 |
Configuring Speed, Port VSAN, and Mode |
| 1.2.2 |
Buffer Credit Configuration |
| 1.30 |
Interface Verification |
| 1.3.1 |
Status |
| 1.3.2 |
Counters |
| 1.3.3 |
Errors |
| 1.40 |
Configuring Trunking |
| 1.4.1 |
VSAN Allowed List |
| 1.4.2 |
Displaying Trunking Information |
| 1.50 |
Port Channel Configuration (Compatibility Parameters) |
| 1.5.1 |
Adding Interfaces to a Port Channel |
| 1.5.2 |
Port Channel Autocreation |
| 1.60 |
VSAN Configuration |
| 1.6.1 |
VSAN Creation |
| 1.6.2 |
VSAN Membership |
| 1.70 |
Zoning |
| 1.7.1 |
Configuring Zones and Zonesets |
| 1.7.2 |
Advanced Zoning |
| 1.7.3 |
Enhanced Zoning |
| 1.7.4 |
Zone Merging Rules |
| 1.7.5 |
Zoning Policy |
| 1.80 |
Traffic Engineering and Oversubscription |
| 1.8.1 |
FSPF Configuration |
| 1.8.2 |
Buffer Credit Allocation |
| 1.8.3 |
Mix of Line Card Generation 1 and 2 |
| 1.8.4 |
Configuring Resources on Generation 2 Modules and Allocating Ports |
| 1.90 |
Fibre Channel Domain Controller Configuration |
| 1.9.1 |
Domain ID |
| 1.9.2 |
Priority |
| 1.9.3 |
Domain ID Type (Static, Dynamic, Persistent) Configuration |
| 1.9.4 |
Principal Switch Selection Procedure |
| 1.9.5 |
Fabric Reconfiguration Control |
| 2.0 |
Advanced Features
Configuring Fibre Channel Advanced Features |
| 2.01 |
Basic Configuration |
| 2.01.1 |
When to Use IVR NAT |
| 2.01.2 |
Enabling IVR |
| 2.01.3 |
Using IVR with Distribution |
| 2.01.4 |
Identifying the Topology: VSANs and Border Switches |
| 2.020 |
IVR VSAN Topology |
| 2.02.1 |
Usage of AFIDs |
| 2.02.2 |
Activation of an IVR Topology |
| 2.02.3 |
Adding or Deleting a Switch in a Topology |
| 2.02.4 |
Adding a New Topology over an Existing One with no Disruption |
| 2.030 |
IVR Service Groups and Their Activation |
| 2.040 |
IVR in Interoperability Mode |
| 2.050 |
Configuring Persistent FCIDs and Static Fibre Channel Domain |
| 2.060 |
Configuring IVR Zoneset and Zones |
| 2.06.1 |
Activating an IVR Zoneset |
| 2.06.2 |
Verifying an IVR Zoneset |
| 2.070 |
Port Tracking Configuration |
| 2.080 |
Dynamic Port VSAN Membership Configuration |
| 2.090 |
Device Aliases Configuration and Usage |
| 2.10 |
Cisco Fabric Services Implementation |
| 2.10.1 |
Enabling Cisco Fabric Services on Features |
| 2.10.2 |
Segregating Cisco Fabric Services Distribution |
| 2.11 |
Fibre Channel Security |
| 3.0 |
FICON
Configuring FICON |
| 3.01 |
FICON Architecture |
| 3.02 |
FICON Numbering Schemes |
| 3.03 |
Port Numbering Assignment |
| 3.04 |
Enabling FICON |
| 3.05 |
Setting Up Basic Configuration (Using Setup Wizard and Not Using It) |
| 3.06 |
FICON Parameter Configuration |
| 3.07 |
Port Blocking |
| 3.08 |
Port Swapping |
| 3.09 |
CUP Configuration |
| 3.10 |
Configuring a FICON IPL File |
| 4.0 |
Interoperability
Configuring Interoperability |
| 4.1 |
Interoperability Modes |
| 4.2 |
Configuring a VSAN in Interoperability Mode |
| 4.3 |
Interoperability Mode 4–Specific Configurations |
| 4.4 |
Zoning in Interoperability Mode |
| 5.0 |
IP-Based Storage
Configuring IP-Based Solutions |
| 5.1 |
Implementing IP Features, Including High Availability |
| 5.1.1 |
Configuring Gigabit Ethernet Interfaces |
| 5.1.2 |
Configuring VRRP |
| 5.1.3 |
Configuring Ethernet Parameters and TCP/IP Parameters |
| 5.1.3.1 |
MTU |
| 5.1.3.2 |
Compression Rate |
| 5.1.3.3 |
Number of Connections |
| 5.1.3.4 |
Bandwidth |
| 5.1.3.5 |
Routing |
| 5.2 |
Implementing iSCSI |
| 5.2.1 |
Enabling iSCSI |
| 5.2.2 |
Configuring Initiators |
| 5.2.3 |
Configuring Targets |
| 5.2.4 |
iSCSI Zoning |
| 5.3 |
SAN Extension Tuner Configuration |
| 5.4 |
Network Simulator Configuration |
| 5.5 |
iSLB Configuration |
| 5.6 |
iSNS Configuration |
| 5.7 |
Implementing FCIP and Security Features |
| 5.7.1 |
Configuring FCIP Profiles |
| 5.7.2 |
Configuring Security on FCIP |
| 6.0 |
Implementing SAN Management
Configuring Management Features |
| 6.1 |
Implementing Cisco Fabric Manager and Device Manager |
| 6.1.1 |
Installation |
| 6.1.2 |
Reporting |
| 6.1.3 |
Performance Monitor |
| 6.2 |
CLI Variables |
| 6.3 |
CLI Aliases |
| 6.4 |
Scripting |
| 6.4.1 |
Creating Scripts |
| 6.4.2 |
Launching Scripts |
| 6.4.3 |
Scheduling Scripts |
| 6.5 |
Scheduler |
| 6.5.1 |
Defining a Job |
| 6.5.2 |
Scheduling a Job |
| 6.5.3 |
Scheduling a Recurrence |
| 6.6 |
Call Home |
| 6.6.1 |
Enabling Call Home |
| 6.6.2 |
Configuring Call Home Parameters |
| 6.6.3 |
Call Home Customer Commands |
| 6.7 |
In-Band Management Configuration |
| 6.7.1 |
VSAN Interfaces |
| 6.7.2 |
IP Infrastructure |
| 6.8 |
Implementing AAA Services |
| 6.8.1 |
Configuring AAA Servers |
| 6.8.2 |
Configuring Role-Based Access Control |
| 6.8.2.1 |
Per VSAN |
| 6.8.2.2 |
Per Feature |
| 6.8.2.3 |
Configuring Groups |
| 7.0 |
Cisco Intelligent Storage Services
Configuring Intelligent Features |
| 7.1 |
Fibre Channel Write Acceleration |
| 7.2 |
SANTap |
| 7.3 |
Cisco SME |
| 7.4 |
Cisco DMM |
| 8.0 |
Troubleshooting SAN Infrastructure
Troubleshooting the SAN |
| 8.1 |
Wireshark Usage |
| 8.2 |
SPAN Configuration |
| 8.3 |
RSPAN Setup |
| 8.4 |
Fibre Channel Tunnels |
| 8.5 |
Debugs |
| 8.6 |
FC Analyzer Configuration and Use |
| 8.7 |
System Logging Facilities |
| 8.8 |
Configurations Related to Image Handling |
| 8.9 |
Switch Recovery from a Failing Boot |
